Installation Video

• Installation situation (ATTR-1): floor slab installation
• Country of origin (ATTR-322): DE
• - (ATTR-370):
• Area of application (ATTR-264): drainage
• Pump type (ATTR-265): Freestanding pump
• Pump shaft position (ATTR-266): vertical
• Pump design (ATTR-267): Dry rotor pump
• Pump hydraulics (ATTR-268): single stage
• Pump suction characteristic (ATTR-269): non-self-priming
• Pump drive (ATTR-270): E-motor for alternating current
• E-motor, type of startup (ATTR-271): direct
• Pump casing material (ATTR-272): Polymer
• Upper tolerance of the operating voltage (+) (ATTR-273): 10  PROZ
• Lower tolerance of the operating voltage (-) (ATTR-274): 10  PROZ
• Upper tolerance of the nominal frequency (+) (ATTR-275): 3  PROZ
• Lower tolerance of the nominal frequency (-) (ATTR-276): 2  PROZ
• Pump electrical connection (ATTR-277): 1/N/PE 230V
• Startup circuit for three-phase connection or three-phase current (ATTR-278):
• Motor pump shaft (ATTR-279): continuous
• Shaft seal (ATTR-280): RSSR
• Number of operating pumps (ATTR-281): 1
• Minimum pumped media temperature (ATTR-282): 0  CEL
• Maximum operating pressure (Pmax) (ATTR-283): 1,000  HPA
• Minimum speed for speed adjustment (ATTR-284): no speed adjustment
• Vertical installation (ATTR-286): yes
• Pump (ATTR-4): SPZ 1000
• Number of pumps (ATTR-181): 1
• Impeller type (ATTR-8): Macerator
• Type of pump connection cable (ATTR-N2): H07RN-F 3G 1.0 mm2
• Type of fuse required (electrical protection) (ATTR-N3): Fuse protection through control unit 230 V
• Max. permissible switching frequency (ATTR-162): 20  1PH
• Operating mode (ATTR-10): S3 - 50 %
• Power P1 (ATTR-F4): 1.2  KWT
• Power P2 (ATTR-F5): 0.7  KWT
• Speed (ATTR-F2): 2,800  UMIN
• Operating voltage (ATTR-131): 230  VLT
• Mains frequency (ATTR-N4): 50  HTZ
• Rated current (ATTR-N5): 5.2  AMP
• Max. pumping capacity (ATTR-F7): 11.5  MQH
• Max. pumping height (ATTR-F8): 10  MTR
• Max. temperature (permanent) of conveyed material (ATTR-132): 40  CEL
• Protection class (ATTR-133): I
• Connection type (ATTR-N1): coded plug
• Protection class (pump) (ATTR-125): IP 68
• Length of mains cable for pump (ATTR-11): 5  MTR
• Temperature monitoring (ATTR-135): integrated
• Weight (ATTR-191): 10  KGM
• Cos phi - power factor (ATTR-192): 1.0
• Insulation class (ATTR-193): F
• Expected service life (hours of operation) (ATTR-194): 5,000  HUR
• Expected service life (number of switching cycles) (ATTR-195): 150,000
• Installation depth (ATTR-B2_VB): 490  MMT
• Vertical adjustment (ATTR-177): vertically adjustable upper section
• Length (ATTR-A6A): 670  MMT
• Width (ATTR-A6B): 590  MMT
• Cutout dimension, length (ATTR-160): 800  MMT
• Cutout dimension, width (ATTR-161): 800  MMT
• Volume (ATTR-320): 0.4  MTQ
• Packaging dimension: length (ATTR-325): 620  MMT
• Packaging dimension: width (ATTR-326): 620  MMT
• Packaging dimension: height (ATTR-327): 1,030  MMT
• Dimensions (ATTR-323): 620X620X1030MM
• Number of packages (ATTR-321): 1
• Type of waterproofing layer (ATTR-170): Waterproofing layer
• Odour trap (ATTR-115): Multistop
• Shut-off valve (ATTR-A1): without shut-off valve
• Pressure pipe connection (ATTR-B7): horizontal
• Type of system (ATTR-2): Single station
• Backflow preventer (ATTR-165): integrated
• Pump control (ATTR-134): Control unit
• Control unit (ATTR-S2): Comfort
• Self-diagnosis system (SDS) (ATTR-S5): yes
• Battery buffering (ATTR-S6): yes
• Multi-line display (ATTR-S7): yes
• Log book function (ATTR-S8): yes
• USB interface (ATTR-S9): yes
• GSM interface (ATTR-S10): yes
• Potential-free contact (ATTR-S11): optional
• Length of mains cable for control unit (ATTR-S12): 1.4  MTR
• Operating voltage (ATTR-S13): 230  VLT
• Mains frequency (ATTR-S14): 50  HTZ
• Protection class control unit (ATTR-S4): IP 54
• Alarm sensor (ATTR-S1): optical probe
• Type of level measurement (ATTR-7A): pneumatic
• Level measurement instrument (ATTR-7B): Immersion pipe
• Type of fuse required (electrical protection) (ATTR-S17): C 16 A
• Motor protection switch (ATTR-172): yes
• - (ATTR-S21):
• - (ATTR-S22):
• - (ATTR-S23):
• Number of inlets (ATTR-B1B): 1  PCE
• Inlet nominal size (DN) (ATTR-B1CA): 100  MMT
• Inlet nominal size (OD) (ATTR-B1CB): 110  MMT
• Distance from centre of inlet pipe to tank bottom (ATTR-B6): 207  MMT
• Distance pipe bottom inlet to tank bottom (ATTR-B1D): 152  MMT
• Distance from centre of outlet pipe to tank bottom (ATTR-B15E): 351  MMT
• Connection conduit pipe (DN) (ATTR-B3): 50  MMT
• Venting connection (DN) (ATTR-B4): 70  MMT
• Pressure pipe connection (DN) (ATTR-B17): 32  MMT
• Pressure pipe connection (OD) (ATTR-B18): 40  MMT
• Tank volume (ATTR-B9): 40  LTR
• Pumping volume (ATTR-B10): 20  LTR
• Type of cover (ATTR-A21): tileable cover plate
• Locking (ATTR-A2D): Lock & Lift
• Cover material (ATTR-A2E): Polymer
• Drainage function (ATTR-A2H): yes
• Max. flooring height (ATTR-A2L): 16  MMT
• Length (ATTR-A2M): 366  MMT
• Width (ATTR-A2N): 366  MMT
• Approval (ATTR-A5): Z-53.2-484
• Delivery state (ATTR-189): Pre-mounted for final assembly on site (pumps and sensor system must be fitted on site and control unit must be connected)
• Declaration of Performance (DOP) (ATTR-292): 009-064
• Wastewater quantity (ATTR-310): Medium
• Type of wastewater (ATTR-6): wastewater with sewage
• Declaration of conformity (ATTR-303): 009-064-D
• Colour (ATTR-102): black
• Brand (M-ATTR-001): KESSEL
• Product group (M-ATTR-002): Lifting stations
• Product type (M-ATTR-003): Lifting station
• Product family (M-ATTR-004): Aqualift
• Product name (M-ATTR-005): Aqualift F Compact
• Start-up current (ATTR-285): 14.9  AMP
• Groundwater resistant from lower edge of base section (ATTR-B12): 3,000  MMT